Nylon membrane pleated filter element
This industrial filter element uses high filtration accuracy and has good hydrophilicity, so that the Nylon filter element can be widely used in ultrapure water and chemical liquids without adding surfactants or IPA pre-wet. Filter, so it can effectively reduce the cleaning time and cost of the filter element.
Features
- Nylon membrane has excellent hydrophilicity and does not require PApre-wet.
- The filter membrane does not add any surfactants, effectively reducing the cleaning time of the filter element.
- 0.9m² of filtration area, high flow, low pressure difference.
- 18M-Ω DI water/2GPM cleaning for 30min, TOC content is lower than 40ppbo.
specification
Pore Siz | 0.1 , 0.2 , 0.45 , 0.65 , 1 micron | the inside diameter of | 28mm |
Filter material | Nylon hydrophilic membrane | Outer diameter | 69mm |
size | 10" , 20" , 30" , 40" | | |
Operating conditions
Maximum operating pressure difference | At 95°C: 1.4 kg/cm² |
Maximum operating pressure difference | At 60 °C : 1.4 kg/cm² |
Maximum operating pressure difference | At 20°C: 5.5 kg/cm² |
Operating temperature | Chemical liquid: 60 °C |
Operating temperature | Food, beverages, pure water: 95 °C |